A couple of notes on re-assembly:

Test the screen before peeling the backing off the double-sided tape. Connect the screen to the cable and turn on the machine. This way, you can still return the screen if it arrived DOA. Some companies don't like to take them back after they've been fully installed.

After you get the connector in place, and you are sure it's completely seated, tape it down with clear packing tape. They do have a tendency to walk themselves back out of the socket.

Make sure that the display cable does not pinched when closing the back.

Save yourself some frustration and test the screen again before closing up, so you know the connector is fully connected and the screen comes on.

Don't forget to remove the protective film on the new screen before re-assembly.