注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南。
正翻译步骤 2
步骤 2
-
In the following steps you will be cutting through the adhesive on the rear glass panel.
-
Take note of the following areas:
-
In addition to cutting around the edge, there is extra adhesive here that should be cut.
-
Avoid sticking the spudger blade in too far here, to avoid damaging the rear button ribbon cable and chip.
您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。