我的工作台

快速访问设备的指南、配件和论坛

Mac mini Mid 2010 Logic Board Replacement

注：你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的14本指南。

英语

中文

上一步下一步

正翻译步骤 6

步骤 6

Mac mini Mid 2010 Logic Board Replacement: 步骤 0 中的图像 1，3

Mac mini Mid 2010 Logic Board Replacement: 步骤 0 中的图像 2，3

Mac mini Mid 2010 Logic Board Replacement: 步骤 0 中的图像 3，3

To remove the logic board, two cylindrical rods must be inserted into the holes highlighted in red. Inserting instruments into any logic board holes other than the ones highlighted in red may destroy the logic board.
Insert a Mac mini Logic Board Removal Tool into the two holes highlighted in red. Be sure it makes contact with the outer case below the logic board before proceeding.
If you don't have a Logic Board Removal Tool handy, you can use two tools having a maximum diameter of 2.5 mm instead. Just insert one into each of the highlighted holes.
Carefully pull the tool toward the I/O board. The logic board and I/O board assembly should slightly slide out of the outer case.
Cease prying when the I/O board is visibly separated from the outer case. Remove the Mac mini Logic Board Removal tool.

您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。