跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的2指南

英语
中文

正翻译步骤 2

步骤 2
Unscrew the two Phillips #00 screws that hold the metal plate in place. The plate, which is covering the battery connector, has two little hooks on each side. Use a tweezer to free them and unhinge the plate by carefully moving it upwards. The plate, which is covering the battery connector, has two little hooks on each side. Use a tweezer to free them and unhinge the plate by carefully moving it upwards.
  • Unscrew the two Phillips #00 screws that hold the metal plate in place.

  • The plate, which is covering the battery connector, has two little hooks on each side. Use a tweezer to free them and unhinge the plate by carefully moving it upwards.

拧下将金属板固定到位的两颗十字 #00 螺丝。

这块金属板将电池连接部位覆盖,两侧均有一个钩子。 使用镊子来将两个钩子松开。

在开源创作共享许可协议下,你的投稿已被许可