我的工作台

快速访问设备的指南、配件和论坛

Ersa i-CON 1 soldering station display backlight replacement

英语

中文

上一步下一步

正翻译步骤 8

步骤 8

Ersa i-CON 1 soldering station display backlight replacement, Seat the strip back onto the display: 步骤 0 中的图像 1，1

Seat the strip back onto the display

Stick the circuit strip back onto the plexiglass base.
Keep in mind that the new components are slightly wider, so make sure the strip doesn't bulge or stick out anywhere. If the strip doesn't fit properly, unstick it and try a slightly different position until it sits flat and securely.

您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。