跳转到主内容
英语
中文

正翻译步骤 4

步骤 4
Use a coffee filter or a lint-free cloth and a little isopropyl alcohol (a.k.a. IPA, 90% concentration or greater)  to clean the thermal paste residue off the thermal contact surface of your heat sink. Instead of IPA, you may also use a dedicated cleaning agent, such as ArctiClean Thermal Material Remover.
  • Use a coffee filter or a lint-free cloth and a little isopropyl alcohol (a.k.a. IPA, 90% concentration or greater) to clean the thermal paste residue off the thermal contact surface of your heat sink.

  • Instead of IPA, you may also use a dedicated cleaning agent, such as ArctiClean Thermal Material Remover.

  • Once the surface is clean, use a fresh piece of coffee filter or cloth and a little more IPA to remove any oils and prepare the surface.

  • Do not touch either the chip or the heatsink, or allow any dust or debris to get on them. Even a fingerprint can be a major obstacle to thermal transfer on a chip.

  • Allow the heat sink(s) to dry completely!

用一张咖啡滤纸或无纺布沾取一点异丙醇(又名IPA,90%以上浓度),来将残留在与散热片接触表面上的散热膏清理干净。

除了异丙醇,您也可以使用更加复杂的清理溶剂,如ArctiClean 散热膏清除剂。

当该表面干净后,使用一张新的咖啡滤纸或无纺布沾取更多的异丙醇,来擦除表面的油质并将表面准备好。

请勿直接接触芯片或散热片,或者让任何灰尘或碎屑落在表面。 即使指纹也可能阻碍芯片的热传递。

让散热器完全晾干。

在开源创作共享许可协议下,你的投稿已被许可