跳转到主内容

Mac Mini 中期 2011 逻辑板更换

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的20本指南

英语
中文

正翻译步骤 4

步骤 4
Mac mini Mid 2011 Logic Board Replacement: 步骤 0 中的图像 1,3 Mac mini Mid 2011 Logic Board Replacement: 步骤 0 中的图像 2,3 Mac mini Mid 2011 Logic Board Replacement: 步骤 0 中的图像 3,3
  • To remove the logic board, the two cylindrical rods of the Mac mini Logic Board Removal Tool must be inserted into the holes highlighted in red. Inserting instruments into any logic board holes other than the ones highlighted in red may destroy the logic board.

  • Insert the Mac mini Logic Board Removal Tool into the two holes highlighted in red. Be sure it makes contact with the top side of outer case below the logic board before proceeding.

  • Carefully pull the tool toward the I/O board. The logic board and I/O board assembly should slightly slide out of the outer case.

  • Cease prying when the I/O board is visibly separated from the outer case.

  • Remove the Mac mini Logic Board Removal tool.

要卸下逻辑板,必须将Mac Mini 逻辑板拆卸工具的两个圆柱杆插入图片红色圆圈的孔中。将工具插入红色圆圈以外的逻辑板孔可能会损坏逻辑板。

Mac Mini 逻辑板拆卸工具插入红色圆圈的两个孔中。 在继续之前,确保它与逻辑板下面的外壳的顶部接触。

小心地将工具拉向I / O板。 逻辑板和I / O板组件应稍微从外壳中滑出。

当I / O板与外壳明显分离时,停止撬动。

取下Mac Mini 逻辑板拆卸工具。

-[* icon_caution] To remove the logic board, the two cylindrical rods of the Mac Mini Logic Board Removal Tool must be inserted into the holes highlighted in red. Inserting instruments into any logic board holes other than the ones highlighted in red may destroy the logic board.
-[* red] Insert the [product|IF145-159|Mac Mini Logic Board Removal Tool] into the two holes highlighted in red. Be sure it makes contact with the top side of outer case below the logic board before proceeding.
+[* icon_caution] To remove the logic board, the two cylindrical rods of the Mac mini Logic Board Removal Tool must be inserted into the holes highlighted in red. Inserting instruments into any logic board holes other than the ones highlighted in red may destroy the logic board.
+[* red] Insert the [product|IF145-159|Mac mini Logic Board Removal Tool] into the two holes highlighted in red. Be sure it makes contact with the top side of outer case below the logic board before proceeding.
[* black] Carefully pull the tool toward the I/O board. The logic board and I/O board assembly should slightly slide out of the outer case.
[* icon_note] Cease prying when the I/O board is visibly separated from the outer case.
-[* black] Remove the Mac Mini Logic Board Removal tool.
+[* black] Remove the Mac mini Logic Board Removal tool.

您的所有投稿皆享有基于开源创作共享许可协议(CC BY-NC-SA)著作权利