注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的27指南。
正翻译步骤 2
步骤 2
-
Grasp the small tab at the end of one of the bottom edge display adhesive strips and pull the adhesive toward the top of the iMac to remove it.
-
Repeat this step with the other adhesive strip and remove it.
| [* icon_caution] Be very careful not to touch the capacitor leads or any exposed solder joints on the back of the power supply (boxed in red). | |
| [* black] Grasp the small tab at the end of one of the bottom edge display adhesive strips and pull the adhesive toward the top of the iMac to remove it. | |
| [* black] Repeat this step with the other adhesive strip and remove it. | |
| - | [* icon_note] If either adhesive strip breaks before it's removed, use a plastic card to slice through the remaining adhesive. |
| + | [* icon_note] If either adhesive strip breaks before it's removed, use a [product|IF145-101|plastic card] to slice through the remaining adhesive. |
您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。