注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的10指南。
正翻译步骤 2
步骤 2
-
Remove the two 10 mm T10 Torx screws securing the right speaker to the rear enclosure.
| [* red] Remove the two 10 mm T10 Torx screws securing the right speaker to the rear enclosure. | |
| - | [* icon_note] Rubber washers keep the screws snug in the speaker even when loosened. You can use tweezers or a fingernail to remove the screws, or simply leave them with the speaker assembly. |
| + | [* icon_note] Rubber washers keep the screws snug in the speaker even when loosened. You can use [product|IF145-020|tweezers] or a fingernail to remove the screws, or simply leave them with the speaker assembly. |
您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。