跳转到主内容

iPod Touch 1st Generation Logic Board Replacement

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的4本指南

英语
中文

正翻译步骤 1

步骤 1
iPod Touch 1st Generation Logic Board Replacement: 步骤 0 中的图像 1,1
  • The battery is glued to the iPod's display, but no screws hold it in place.

  • Flip the iPod 180 degrees so it matches the orientation in the picture.

  • Carefully insert the spudger in between the battery and the display. There are routing cables underneath, so make sure you slowly pry the battery loose.

在此插入翻译

在此插入翻译

在此插入翻译

您的所有投稿皆享有基于开源创作共享许可协议(CC BY-NC-SA)著作权利