我的工作台

快速访问设备的指南、配件和论坛

iPod Touch (1. Generation) Logic Board tauschen

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的4指南。

英语

德语

上一步下一步

正翻译步骤 4

步骤 4

iPod Touch 1st Generation Logic Board Replacement: 步骤 0 中的图像 1，2

iPod Touch 1st Generation Logic Board Replacement: 步骤 0 中的图像 2，2

Use the spudger to remove the black masking tape. This will reveal the top two screws in the picture.
Unscrew the three 2.4 mm Phillips screws.
Unscrew the 3.8 mm Philips screw.
Use a spudger to disconnect the black connector.
Use a spudger to disconnect the black connector.

	[* black] Use the spudger to remove the black masking tape. This will reveal the top two screws in the picture.
-	[* red] Unscrew the four Phillips screws.
+	[* red] Unscrew the three 2.4 mm Phillips screws.
+	[* yellow] Unscrew the 3.8 mm Philips screw.
	[* black] Use a spudger to disconnect the black connector.
	[* black] Use a spudger to disconnect the black connector.

您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。