Skip to main content

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的9指南

英语
中文

正翻译步骤 1

Step 1
Use the flat end of a spudger to pry both short sides of the battery connector upward to disconnect it from its socket on the logic board. Bend the battery cable slightly away from the logic board so the connector will not accidentally contact its socket.
  • Use the flat end of a spudger to pry both short sides of the battery connector upward to disconnect it from its socket on the logic board.

  • Bend the battery cable slightly away from the logic board so the connector will not accidentally contact its socket.

使用撬棒的扁平一端来将电池接口的两端从主板板插座中翘起。

将插头稍微弯曲,使其远离主板插座,以防止意外短路。

在开源创作共享许可协议下,你的投稿已被许可