跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的3指南

英语
中文

正翻译步骤 1

步骤 1
Remove the following four press-fit connectors with the flat edge of a plastic spudger or opening tool: Front-facing camera connector.
  • Remove the following four press-fit connectors with the flat edge of a plastic spudger or opening tool:

  • Front-facing camera connector.

  • Rear-facing camera connector.

  • Digitizer connector.

  • The rear-facing camera may be held down to the frame with two sided tape. Try to move the camera with the spudger prior to lifting the motherboard If it does not budge, use the same tool to pry it from the frame to avoid damaging the connector cable in the next step.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可