跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
中文

正翻译步骤 3

步骤 3
Remove the thirteen 6 mm Torx T8 screws. Some screws have plastic covers over them that need to be pried out before the screws can be removed. Remove the single 7 mm Phillips #1 screw.
  • Remove the thirteen 6 mm Torx T8 screws.

  • Some screws have plastic covers over them that need to be pried out before the screws can be removed.

  • Remove the single 7 mm Phillips #1 screw.

  • Loosen the two Phillips #1 screws. These screws will remain captive to the device.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可