注：你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的2本指南。
正翻译步骤 9
步骤 9
-
Remove the four outer 5.3 mm T8 Torx screws (two on each side) securing the display to the upper case.
| [* red] Remove the four outer 5.3 mm T8 Torx screws (two on each side) securing the display to the upper case. | |
| [* icon_note] Some models may use T9 Torx screws rather than T8. | |
| + | [* icon_note] If the rubber hinge cover adhesive is still on the screw heads, use tweezers to peel and remove it. |
您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。