跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
中文

正翻译步骤 4

Step 4
Lay the backed adhesive tape down on the Force Touch sensor, around the edge of the case where the screen rests. Start in a corner with the tape as close to the corner wall as possible. Press on the brown backing paper with a plastic opening tool to secure the adhesive around the entire perimeter.
  • Lay the backed adhesive tape down on the Force Touch sensor, around the edge of the case where the screen rests.

  • Start in a corner with the tape as close to the corner wall as possible.

  • Press on the brown backing paper with a plastic opening tool to secure the adhesive around the entire perimeter.

将胶带背面放在Force Touch 传感器上,围绕在设备外壳的边缘处。

角对角的粘贴。

使用塑料撬棒来轻轻按压来确保整个胶带已经粘合在设备上面。

在开源创作共享许可协议下,你的投稿已被许可