跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的5指南

英语
中文

正翻译步骤 3

步骤 3
Peel back the second battery adhesive tab from the other side of the battery. Again, pull and slowly stretch the adhesive tab to slide it out from between the battery and the rear case.
  • Peel back the second battery adhesive tab from the other side of the battery.

  • Again, pull and slowly stretch the adhesive tab to slide it out from between the battery and the rear case.

  • Continue pulling the adhesive tab until it releases completely from the battery. If it breaks, try to retrieve the remaining length and continue pulling, or proceed as instructed below.

在电池的另一侧将易拉胶条头拉出

再次,慢慢拉出易拉胶条头,将它从电池与后盖之间拉出。

继续拉出易拉胶条头直到它完全剥离电池。如果中途断裂,请卷起剩余的部分继续拉,或者按照以下步骤处理

在开源创作共享许可协议下,你的投稿已被许可