跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的5指南

英语
中文

正翻译步骤 4

步骤 4
Peel back the final battery adhesive tab from the bottom edge of the battery. Gently pull the battery adhesive tab upward and away from the battery, allowing the adhesive strip to slowly slide out from between the battery and the rear case. Place one hand over the battery as the final strip comes out, or it may fling the battery out of the iPhone.
  • Peel back the final battery adhesive tab from the bottom edge of the battery.

  • Gently pull the battery adhesive tab upward and away from the battery, allowing the adhesive strip to slowly slide out from between the battery and the rear case.

  • Place one hand over the battery as the final strip comes out, or it may fling the battery out of the iPhone.

  • Continue pulling until the final strip comes free from the iPhone.

  • If you removed all three adhesive strips successfully, skip over the next two steps.

  • If any of the adhesive strips broke off underneath the battery and could not be retrieved, continue with the next step below.

从电池底部边缘拉出最后一条易拉胶。

向上轻拉易拉胶使其从电池和后盖间慢慢分离出来。

在拉出最后一条易拉胶的同时请将一只手按住电池,否则胶条可能会将电池带离iPhone

继续轻拉易拉胶使其从机身中完全分离出来。

如果你成功将三条易拉胶取出,请跳过以下两步

如果任意一条易拉胶断裂在了电池底部,请继续以下步骤

在开源创作共享许可协议下,你的投稿已被许可