跳转到主内容

iMac Intel 21.5インチ EMC 2805のディスプレイアセンブリの交換

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的80指南

英语
日语

正翻译步骤 10

步骤 10
iMac Intel 21.5" EMC 2805 Display Assembly Replacement: 步骤 0 中的图像 1,3 iMac Intel 21.5" EMC 2805 Display Assembly Replacement: 步骤 0 中的图像 2,3 iMac Intel 21.5" EMC 2805 Display Assembly Replacement: 步骤 0 中的图像 3,3
  • While the opening tool cut most of the adhesive, the display will still be slightly adhered to the case. A plastic card will be necessary to free up the last of this adhesive.

  • Set the iMac face-up on a table.

  • Starting from the top right corner of the iMac, wedge a plastic card between the display and frame.

  • Be careful not to insert the plastic card more than 3/8", or you may damage internal components.

開口ツールがディスプレイ上の接着剤の大部分を切断できても、ディスプレイはわずかにケースに装着されたままです。残りの接着剤から完全に乖離するため、プラスチックカードを使用してください。

iMacのフロント側を上向きにしてテーブル上に置いてください。

iMac右側の上部から、ディスプレイとフレームの間にプラスチックカードを差し込みます。

9.5mm以上はプラスチックカードを差し込まないでください。内部コンポーネントにダメージを与えてしまいます。

您的所有投稿皆享有基于开源创作共享许可协议(CC BY-NC-SA)著作权利