翻译步骤＃2 - iPod Nano 7th Generation Front Panel Assembly Replacement - iFixit

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的6指南。

英语

中文

上一步下一步

正翻译步骤 2

步骤 2

Use a plastic opening tool to pull the rear plastic cover away from the device until there is enough room to insert a spudger.

Insert a spudger under the cover, then pry it up and away from the device.

Remove the rear plastic cover from the iPod.

Use a plastic opening tool to pull the rear plastic cover away from the device until there is enough room to insert a spudger.
Insert a spudger under the cover, then pry it up and away from the device.
Remove the rear plastic cover from the iPod.
Be very careful in removing the plastic cover as the bluetooth antenna is adhered to it.

在开源创作共享许可协议下，你的投稿已被许可。