正翻译步骤 9
步骤 9
-
To remove the power supply from the housing first remove the three T6 screws from the power supply.
-
Using a set of tweezers, remove the retention clip from under the AC inlet. This will allow us to rotate the inlet. Rotating the inlet 90 degrees counterclockwise will allow us to slide the power supply out of the housing.
| [* black] To remove the power supply from the housing first remove the three T6 screws from the power supply. | |
| - | [* black] Using a set of tweezers, remove the retention clip from under the AC inlet. This will allow us to rotate the inlet. Rotating the inlet 90 degrees counterclockwise will allow us to slide the power supply out of the housing. |
| + | [* black] Using a set of [product|IF145-020|tweezers], remove the retention clip from under the AC inlet. This will allow us to rotate the inlet. Rotating the inlet 90 degrees counterclockwise will allow us to slide the power supply out of the housing. |
您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。