/
我的工作台

快速访问设备的指南、配件和论坛

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
注册
登录

Reemplazo de RAM en CyberSeriesPC C-Series

返回指南
英语
西班牙语
上一步 下一步

正翻译步骤 2

步骤 2
CyberSeriesPC C-Series RAM Replacement: 步骤 0 中的图像 1，3 CyberSeriesPC C-Series RAM Replacement: 步骤 0 中的图像 2，3 CyberSeriesPC C-Series RAM Replacement: 步骤 0 中的图像 3，3

  • Place the computer on a table.

  • Remove the screws holding the side panel with a screwdriver.

  • Slide the side panel from right to left to open the computer and see its components.

  • Place the side panel somewhere else to keep the area clear, and set the computer down on its side, where the open side is up for you to work.

  • From here on out, you should have your flashlight to shine a light on your computer so you can see the components.

Coloca la computadora boca abajo sobre una mesa.

Retira los tornillos que sujetan la placa con un destornillador.

Desliza la placa de derecha a izquierda para abrir la computadora y ver su maquinaria.

Coloca la placa en otro lugar para mantener el área despejada y coloca la computadora de lado, donde el lado abierto está hacia arriba para que puedas trabajar.

De ahora en adelante, debes tener tu linterna para iluminar tu computadora para que puedas ver el hardware.

-[* black] Place the computer upside down on a table.
-[* red] Remove the screws holding the plate with a screwdriver.
-[* black] Slide the plate from right to left to open the computer and see its machinery.
-[* black] Place the plate somewhere else to keep the area clear, and set the computer down on its side, where the open side is up for you to work.
-[* icon_note] From here on out, you should have your flashlight to shine a light on your computer so you can see the hardware.
+[* black] Place the computer on a table.
+[* red] Remove the screws holding the side panel with a screwdriver.
+[* black] Slide the side panel from right to left to open the computer and see its components.
+[* black] Place the side panel somewhere else to keep the area clear, and set the computer down on its side, where the open side is up for you to work.
+[* icon_note] From here on out, you should have your flashlight to shine a light on your computer so you can see the components.

您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。