注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的33本指南。
正翻译步骤 2
步骤 2
Remove the shield screws
-
Use a Phillips driver to remove the three screws securing the board shield:
-
One 3.4 mm screw
-
Two 3.7 mm screws
您的所有投稿皆享有基于开源创作共享许可协议(CC BY-NC-SA)的著作权利。