注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的17指南。
正翻译步骤 13
步骤 13
-
Insert the point of a pick under the display where you just stopped cutting. Do not insert the pick deeper than the edge of the bezel.
-
Carefully roll the pick to the right, pressing the long edge of the pick into the screen adhesive underneath the bezel, cutting the adhesive as you go. Do not slide the pick along the edge of the Surface.
-
Repeat this motion of inserting the point of the pick where you just cut, and rolling to the right all along the top edge of the Surface, until the pick is 2.5 inches (64 mm) from the right edge of the Surface.
您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。