注：你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的27本指南。
正翻译步骤 4
步骤 4
Unclip the back panel
-
Insert the flat end of a spudger into the gap between the back panel and the shell, near the left side of the base.
-
Pry up the back panel to release it from the locking clips.
| [title] Unclip the back panel | |
| [* black] Insert the flat end of a spudger into the gap between the back panel and the shell, near the left side of the base. | |
| - | [* black] |
| + | [* black] Pry up the back panel to release it from the locking clips. |
您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。