跳转到主内容

Xbox Series S 塑料外壳更换

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的8指南

英语
中文

正翻译步骤 5

步骤 5
Xbox Series S Plastic Case Replacement, Remove the plastic case: 步骤 0 中的图像 1,3 Xbox Series S Plastic Case Replacement, Remove the plastic case: 步骤 0 中的图像 2,3 Xbox Series S Plastic Case Replacement, Remove the plastic case: 步骤 0 中的图像 3,3
Remove the plastic case
  • With the bottom of the Xbox facing you, pull the two bottom-rear corners of the plastic case away from each other.

  • As you pull the corners apart, slide the back panel towards the bottom of the device. This releases the back panel from the plastic case.

  • The back panel should now settle on top of the clips on the back of the plastic case.

  • The back panel is permanently attached to the aluminum chassis.

  • Do not attempt to fully remove the chassis from the plastic case with this technique. You may risk breaking your case.

将 Xbox 底部面向你,将塑料外壳的两个底部后角相互拉开。

将边角拉开时,将后面板向设备底部滑动。这会从塑料外壳中释放后面板。

后面板现在应该固定在塑料外壳背面的夹子上。

后面板永久固定在铝制底盘上。

请勿尝试使用此技术从塑料外壳中完全卸下机箱。你可能会冒着破案的风险。

您的所有投稿皆享有基于开源创作共享许可协议(CC BY-NC-SA)著作权利