注：你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的14本指南。
正翻译步骤 7
步骤 7
-
Insert an opening pick into the lower-left corner of the rear panel.
-
Using another opening pick, cut the adhesive along the left edge of the rear panel.
| + | [* icon_caution] Be careful near the corners, as the glass is weakest there. |
|---|---|
| [* black] Insert an opening pick into the lower-left corner of the rear panel. | |
| [* black] Using another opening pick, cut the adhesive along the left edge of the rear panel. | |
| - | [* icon_caution] |
| + | [* icon_caution] Don't insert an opening pick in more than halfway on the left edge near the fingerprint sensor or you may damage the ribbon cable inside. |
| [* icon_note] It is fine if opening picks fall out as the back cover becomes separated. |
您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。