跳转到主内容

MacBook Pro 13" Unibody 中期显示屏更换

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的12指南

英语
中文

正翻译步骤 4

步骤 4
MacBook Pro 13" Unibody Mid 2009 Display Replacement: 步骤 0 中的图像 1,2 MacBook Pro 13" Unibody Mid 2009 Display Replacement: 步骤 0 中的图像 2,2
  • Remove the following screws securing the camera data cable and right speaker to the upper case:

  • Two 8 mm Phillips screws.

  • One 4mm Phillips screw.

  • One of the 8 mm Phillips screws will likely remain captive in the camera cable ground loop.

  • Slide the camera cable bracket out from under the subwoofer and remove it from the computer.

移除下列将相机数据线和右扬声器固定在上部机身(C壳)的螺丝:

两颗8mm十字螺丝。

一颗4mm十字螺丝。

其中一颗8mm十字螺丝可能会留在相机线接地回路中。

将相机线支架从低音喇叭下滑出,并将其取出电脑。

您的所有投稿皆享有基于开源创作共享许可协议(CC BY-NC-SA)著作权利