跳转到主内容

三星盖乐世 S20 电池更换

英语
中文

指南信息

= 完成 = 未完成
    This guide shows how to remove and replace the battery for the Samsung Galaxy S20.
    The battery is held in place with strong adhesive. High concentration (over 90%) isopropyl alcohol is necessary to loosen and release this adhesive.
    '''***If your battery is swollen, [[What to do with a swollen battery|take appropriate precautions|new_window=true]] and do not heat your phone.'''***
    '''***For your safety, discharge your battery below 25% before disassembling your phone.'''*** This reduces the risk of a dangerous thermal event if the battery is accidentally damaged during the repair.
    You'll need replacement adhesive in order to complete this repair.
      Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing.
      '''***To reassemble your device, follow the above steps in reverse order.'''***
      After completing Follow ++[link|https://www.ifixit.com/Guide/How+to+Perform+a+Battery+Cycle+Reset/152044|this guide|new_window=true]++ to perform a battery cycle reset, and ++[[link|https://www.ifixit.com/Wiki/Battery _Calibration|calibrate your newly-installed battery|new_window=true]]++.
      Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
      Repair didn’t go as planned? Check out our [link|https://www.ifixit.com/Answers/Device/Galaxy%20S20|Answers community] foror [[Samsung Galaxy S20 Will Not Turn On|S20 battery troubleshooting wiki|new_window=true]] for help.

      说明(指南)步骤

      第 1 步 — 施加酒精

      在框架和电池边缘之间的间隙中使用高浓度(超过90%)的异丙醇。

      第 2 步 — 从粘合剂上提起电池

      将吸气柄放在电池中心。

      第 3 步 — 撬起电池

      注意:在提起电池以至于在电池下方轻松插入三角撬片之前,请勿继续执行此步骤。如果仍将电池牢牢地粘在适当的位置,则有可能会被撬片尖刺穿电池并造成危险的热事件。

      第 4 步 — 移除电池

      取出电池。

      您的所有投稿皆享有基于开源创作共享许可协议(CC BY-NC-SA)著作权利