三星盖乐世 S20 电池更换

英语

中文

正翻译步骤 2

步骤 2

Lift the battery from its adhesive

Apply a suction handle to the center of the battery.
Brace the top and bottom of the device against your work surface with one hand and firmly pull up on the suction handle with the other.
The adhesive takes time and repeated pulls rather than strong force to loosen. Pull on the suction cup with steady force for 15 seconds at a time.
If the battery doesn't loosen, apply 1-2 drops of isopropyl alcohol along the top, left, and right edges, wait a minute, and pull again.
When the battery begins to lift from the device, proceed to the next step.

从粘合剂上提起电池

将吸气柄放在电池中心。
用一只手将设备的顶部和底部支撑在工作表面上，用另一只手稳固地向上拉起吸气手柄。
第一次执行此操作时，电池不会松动。重复此过程（添加酒精，等待2-3分钟，然后用吸柄拉动）五到六次，以逐渐软化粘合剂。
当电池开始从设备中提起时，请继续执行下一步。

	[title] Lift the battery from its adhesive
	[* black] Apply a suction handle to the center of the battery.
	[* black] Brace the top and bottom of the device against your work surface with one hand and firmly pull up on the suction handle with the other.
-	[* icon_note] The battery will not budge the first time you do this. Repeat the process (add alcohol, wait 2-3 minutes, and pull with the suction handle) five or six times to gradually release the adhesive.
+	[* black] The adhesive takes time and repeated pulls rather than strong force to loosen. Pull on the suction cup with steady force for 15 seconds at a time.
+	[* black] If the battery doesn't loosen, apply 1-2 drops of isopropyl alcohol along the top, left, and right edges, wait a minute, and pull again.
	[* black] When the battery begins to lift from the device, proceed to the next step.