三星盖乐世 S20 电池更换

英语

中文

下一步

正翻译步骤 1

步骤 1

Apply isopropyl alcohol

Apply 1-2 drops of high concentration (over 90%) isopropyl alcohol to the top edge of the battery.
Using too much alcohol can damage the display.
Wait one minute to allow the isopropyl alcohol to soften the adhesive.

施加酒精

在框架和电池边缘之间的间隙中使用高浓度（超过90％）的异丙醇。
电池用大量粘合剂固定在适当的位置，因此可能需要大量的酒精。
使用酒精时，请倾斜设备，以帮助其渗透电池下方的粘合剂。
涂抹酒精后，继续向各个方向倾斜手机两到三分钟，以帮助酒精进一步渗透。

	[title] Apply isopropyl alcohol
-	[* black] Apply high concentration (over 90%) isopropyl alcohol to the gaps in between the frame and the edges of the battery.
-	[* icon_note] The battery is held in place with a large amount of adhesive, so a significant amount of alcohol may be necessary.
-	[* black] Tilt the device as you apply the alcohol to help it penetrate the adhesive underneath the battery.
-	[* black] After you apply the alcohol, continue tilting the phone in all directions for two to three minutes to help the alcohol penetrate further.
+	[* black] Apply 1-2 drops of high concentration (over 90%) isopropyl alcohol to the top edge of the battery.
+	[* icon_caution] Using too much alcohol can damage the display.
+	[* black] Wait one minute to allow the isopropyl alcohol to soften the adhesive.