三星盖乐世 S20 电池更换

英语

中文

上一步

正翻译步骤 4

步骤 4

Remove the battery

Remove the battery.
Peel up and/or scrape away any remaining battery adhesive before cleaning the battery well surface with isopropyl alcohol and a lint free cloth.
If you used isopropyl alcohol, wait ten minutes before installing the new battery to allow the alcohol to completely evaporate.
During reassembly, if your new battery doesn't come with pre-applied adhesive, apply some to the well. Then, firmly press the new battery into place.
Do not reuse the battery after it has been removed, as doing so is a potential safety hazard. Replace it with a new battery.

移除电池

取出电池。
在用异丙醇和不起毛的布清洁电池槽表面之前，请刮下和/或刮去所有残留的电池粘合剂。
在重新组装过程中，如果新电池没有预涂的粘合剂，请在电池孔上涂一些粘合剂。然后，将新电池用力按入到位。
注意：取出电池后，请勿重复使用，因为这样做有潜在的安全隐患。更换新电池。

	[title] Remove the battery
	[* black] Remove the battery.
	[* black] Peel up and/or scrape away any remaining battery adhesive before cleaning the battery well surface with isopropyl alcohol and a lint free cloth.
+	[* black] If you used isopropyl alcohol, wait ten minutes before installing the new battery to allow the alcohol to completely evaporate.
	[* icon_reminder] During reassembly, if your new battery doesn't come with pre-applied adhesive, apply some to the well. Then, firmly press the new battery into place.
-	[* icon_caution] ~~*Caution:*~~ Do not reuse the battery after it has been removed, as doing so is a potential safety hazard. Replace it with a new battery.
+	[* icon_caution] Do not reuse the battery after it has been removed, as doing so is a potential safety hazard. Replace it with a new battery.