华为 Mate 20 Pro 显示屏和数字触控屏更换

英语

中文

指南的前提条件

只有所有的必备指南都已被翻译，此翻译才会被认为是完整的。

华为 Mate 20 Pro 后玻璃更换

华为 Mate 20 Pro 带 NFC 和充电线圈的主板盖更换

华为 Mate 20 Pro 断开电池

华为 Mate 20 Pro 子板盖更换

华为 Mate 20 Pro带子版的扬声器

华为 Mate 20 Pro 带有主柔性电缆的充电口更换

华为 Mate 20 Pro 电池更换

指南信息

= 完成 = 未完成

你要替换的哪一部分？

标题

简介

Use this guide to replace a broken or defective OLED Screen & Digitizer in your Huawei Mate 20 Pro.

'''Note''': This guide instructs you to replace only the screen while leaving the original frame and motherboard in place. However, some replacement screens for this phone come pre-installed in a new frame (a.k.a. chassis), which requires a very different procedure. Make sure you have the correct part before starting this guide.

Opening the Huawei Mate 20 Pro will '''damage the waterproof sealing''' on the device. If you do not replace the adhesive seals, your phone will '''function normally''' but will '''lose its water-protection'''.

Due to the phone’s design, you need to remove the lithium-ion battery in order to remove the screen. '''Reusing a deformed battery after it been removed is a potential safety hazard. Replace it with a new battery.'''

'''Before disassembling your phone, discharge the battery below 25%'''. The battery can catch fire and/or explode if accidentally punctured, but the chances of that happening are much lower if discharged.

You’ll need '''replacement adhesive''' to reattach components when reassembling the device.[br]
[br]

结论