跳转到主内容

更换任天堂Switch Pro手柄外壳

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的7本指南

英语
中文

正翻译步骤 2

步骤 2
Switch Pro Controller Case Replacement: 步骤 0 中的图像 1,3 Switch Pro Controller Case Replacement: 步骤 0 中的图像 2,3 Switch Pro Controller Case Replacement: 步骤 0 中的图像 3,3
  • There's an adhesive pad located in the center of each handle. It will require a bit of force to pry away the front cover, but be mindful of the attached ribbon cable.

  • Delicately take off the plastic cover from the controller.

  • Don't completely remove the front cover just yet, as it's still attached to the motherboard via a white ribbon cable.

每個手柄的中心都有一個粘合墊。撬開前蓋需要一點力,但要注意附帶的帶狀電纜。

如同翻书一样小心缓慢地拆开控制器的塑料外壳。

此时请注意不要卸掉前盖,因为前盖上的电路板和主板之间有白色排线连接着。

您的所有投稿皆享有基于开源创作共享许可协议(CC BY-NC-SA)著作权利