跳转到主内容
英语
中文

正翻译步骤 13

步骤 13
Next up, the ultra-curved screen! We are faced with zero margin between the display and the frame. Patient heating and prying gets our foot in the seam, and we go slicing around corners and curves with our handy pizza cutter iMac Opening Wheel that seems to be tailored for this job. Finally our opening picks can start gnawing on the glue behind the edge …
  • Next up, the ultra-curved screen! We are faced with zero margin between the display and the frame.

  • Patient heating and prying gets our foot in the seam, and we go slicing around corners and curves with our handy pizza cutter iMac Opening Wheel that seems to be tailored for this job.

  • Finally our opening picks can start gnawing on the glue behind the edge …

  • … and eventually grant us the success we deserve—an open display.

  • This display hooks up via a single, rather small connector. Many contemporaries have two separate plugs for the digitizer and the screen.

接下来,超级曲面屏!屏幕和边框之间没有一点缝隙。

一番耐心的加热和撬动让边框打开了一条缝,于是我们用iMac专用披萨刀沿着边框切了一圈。

终于,撬片们可以和边框后的胶水拔河了

并最终让我们得到了一块屏幕。

这块屏幕只有一个超小的连接头。同时代的大部分屏幕都有两个分别用于触碰和显示的连接头。

在开源创作共享许可协议下,你的投稿已被许可