跳转到主内容

開口手順

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的8指南

英语
日语

正翻译步骤 2

步骤 2
Opening Procedure, Anti-Clamp instructions: 步骤 0 中的图像 1,3 Opening Procedure, Anti-Clamp instructions: 步骤 0 中的图像 2,3 Opening Procedure, Anti-Clamp instructions: 步骤 0 中的图像 3,3
Anti-Clamp instructions
  • The next three steps demonstrate the Anti-Clamp, a tool we designed to make the opening procedure easier. If you aren't using the Anti-Clamp, skip down three steps for an alternate method.

  • For complete instructions on how to use the Anti-Clamp, check out this guide.

  • Pull the blue handle backwards to unlock the Anti-Clamp's arms.

  • Slide the arms over either the left or right edge of your iPhone.

  • Position the suction cups near the bottom edge of the iPhone—one on the front, and one on the back.

  • Squeeze the cups together to apply suction to the desired area.

  • If you find that the surface of your iPhone is too slippery for the Anti-Clamp to hold onto, you can use tape to create a grippier surface.

次の3つの手順では、デバイスの開口作業を簡単にするために開発されたツール、リバースクランプの使い方を紹介します。リバースクランプを使用しない場合は、この3つの手順をスキップして別の方法をご覧ください。

リバースクランプの詳細な使用方法については、 こちらのガイドをご覧ください。

青いハンドルを後方に引き、リバースクランプのアームのロックを解除します。

iPhoneの左/右側の端に向けてアームをスライドします。

吸盤カップを、ホームボタンすぐ上のiPhoneの下端付近に装着します。上部に一つ、下部に1つずつ取り付けます。

両側のカップをしっかりと押し付けて、取り付けたい位置に装着します。

作業中のデバイス表面が滑りやすく、吸盤がうまく装着できない場合は、梱包用テープを表面に貼ると、よりグリップ力を強めることができます。

您的所有投稿皆享有基于开源创作共享许可协议(CC BY-NC-SA)著作权利