跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
中文

正翻译步骤 2

步骤 2
Use a plastic opening tool to pry the edge of the home button ribbon cable up from the display assembly. Start on the right, at the area of the ribbon cable between the gold contact points, and work to the left.
  • Use a plastic opening tool to pry the edge of the home button ribbon cable up from the display assembly.

  • Start on the right, at the area of the ribbon cable between the gold contact points, and work to the left.

  • Going left to right may rip your ribbon cable as the contacts are well adhered to the front panel.

  • Prying directly at one gold contact point or the other may break its soldering and pop it off the ribbon cable.

  • If you have trouble sliding the plastic opening tool under the contact points, flip the tool over and gently push against the right side of the contacts to loosen the adhesive, then try again.

使用塑料撬棍沿着Home键排线的边缘将其从显示面板上撬下。

从排线右侧的金色触点开始向左边循序渐进地撬动。

金色触点被牢固地黏着于前面板,因此从左向右撬动排线可能会导致其损坏。

直接在某一个金色触点上撬动可能会导致其焊点从排线上脱落。

如果你无法在触点下方顺利地移动撬棍,将撬棍翻过来,用粗头轻轻地按压右侧的触点,以便使粘合部分松动,然后再次尝试撬动。

在开源创作共享许可协议下,你的投稿已被许可