跳转到主内容

修复你的物品

维修的权力

配件 & 工具

简介

Prereq for removing fan after the hard drive brackets.

配件

没有特定配件。

  1. Use the tip of a spudger to push the fan cable connector out of its socket on the logic board. It is recommended to carefully push on both sides of the connector to walk it out of its socket.
    • Use the tip of a spudger to push the fan cable connector out of its socket on the logic board.

    • It is recommended to carefully push on both sides of the connector to walk it out of its socket.

  2. 任天堂 Switch 套装

    快速恢复到游戏的状态

    购买 Switch 套装

    任天堂 Switch 套装

    快速恢复到游戏的状态

    购买 Switch 套装
  3. Remove the following screws securing the fan to the rear enclosure:
    • Remove the following screws securing the fan to the rear enclosure:

    • Two 12.5 mm T10 screws

    • One 9.9 mm T10 screw

  4. Lift and remove the fan from the iMac. Lift and remove the fan from the iMac.
    • Lift and remove the fan from the iMac.

结论

To reassemble your device, follow these instructions in reverse order.

Walter Galan

632,865 信誉积分

创作了1,203篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 21