我的工作台

快速访问设备的指南、配件和论坛

Revlon RVIR1008 Barrel Clip Replacement

上一步

正翻译步骤 3

英语

中文

步骤 3

Revlon RVIR1008 Barrel Clip Replacement: 步骤 0 中的图像 1，2

Revlon RVIR1008 Barrel Clip Replacement: 步骤 0 中的图像 2，2

Unscrew the two 3mm screws from both sides of the barrel clip with a 3.0 flathead screwdriver to remove the clip from the barrel.
Set the two screws and barrel clip aside for reassembly at a later point.
Clip is prone to pop off from the body due to the weight of the spring. Equally loosen each screw little by little to prevent this.
Inspect clip to see if it just needs to be realigned or replaced completely.
If you are replacing the barrel clip, place the old component to the side. Carefully align the new barrel clip with the proper screw holes, and use the screwdriver to screw the two 3mm screws into to body.

您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。