注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的2指南。
正翻译步骤 2
步骤 2
-
With the device on its back and the label facing you, remove the rubber screw cover on the top left corner of the device.
-
Under the rubber circle, remove the 1.25 mm screw using a Phillips #00 Screwdriver.
您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。