注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的2指南。
正翻译步骤 3
步骤 3
-
Place the phone with the screen facing down onto a flat surface.
-
Place the flat edge of the pry tool into the seam on the side, just above the screen. (refer to picture on where to place pry tool).
-
Push the pry tool into the seam.
-
Pry apart the plates until the cover separates from the rest of the phone. Be careful not to apply too much pressure
-
Proceed to pull the front cover away from the rest of the phone. (refer to second picture for results) The marking foreshadows what we will be using in the next step.
您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。