注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南。
正翻译步骤 6
步骤 6
Remove the Surface Connect port
-
Lift and remove the Surface Connect port.
-
Put the Surface Connect port into place so its cutouts go over their posts on the motherboard. Make sure the port is fully in its cutout—the outer edge should be flush with the frame.
-
Install the two screws that secure the port.
您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。