修复你的物品 社区 商店

Microsoft Surface Pro 5 Opening Procedure

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的13指南。

返回指南
英语
中文
下一步

正翻译步骤 1

步骤 1
Microsoft Surface Pro 5 Opening Procedure, Heat the screen: 步骤 0 中的图像 1，1
Heat the screen

  • Completely power off the Surface before you begin disassembly.

  • If the screen's glass is cracked, keep further breakage contained and prevent bodily harm during your repair by taping over the glass. Lay overlapping strips of clear packing tape over the display until all the glass is covered. Wear safety glasses to protect your eyes.

  • Heat an iOpener and apply it to the right edge of the Surface's screen for two minutes.

  • You may need to reheat and reapply the iOpener several times to get the Surface warm enough. Follow the iOpener instructions to avoid overheating.

  • A hair dryer, heat gun, or hot plate may also be used for more heat, but be careful not to overheat the Surface—the screen and internal battery are susceptible to heat damage.

在此插入翻译

在拆开前，完全断开你的surface的电源

如果屏幕的玻璃破裂，采取措施防止其进一步破损，在维修过程中用胶带粘住玻璃以防止受到人身伤害。在显示屏上黏贴重叠的透明包装胶带条，直到覆盖一整个玻璃。戴上安全眼镜以保护眼睛。

加热 iOpener 并将其放置在 Surface 屏幕的右侧边缘两分钟。

您可能需要多次重新加热并重新放置 iOpener 以使 Surface 达到足够的温度。按照 iOpener 说明进行操作以避免过热。

吹风机、热风枪或热板也可用于获得更多热量，但要注意不要使 Surface 过热 - 这可能使屏幕和内部电池过热损坏。

您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。