跳到步骤＃11
由 Justin Ogihara — 编辑
编辑已通过 由 Justin Ogihara
- 之前
- 之后
- 不变
步骤行
| - | [* black] Using the JIS J0 Screwdriver unscrew and remove the following from the heat shield: |
|---|---|
| - | [* orange] 2 3mm screws |
| + | [* orange] Using the JIS J0 Screwdriver unscrew and remove the (2) two 3 mm screws from the heat shield. |
| [* black] Gently lift up on the heat shield to remove it. |