跳到步骤＃2
由 Justin Ogihara — 编辑
编辑已通过 由 Justin Ogihara
- 之前
- 之后
- 不变
步骤行
| [* black] Using the JIS J0 Screwdriver, remove the following screws from the bottom: | |
| - | [* red] 5 6mm screws |
| - | [* orange] 6 8mm screws |
| + | [* red] (5) Five 6mm screws |
| + | [* orange] (6) Six 8mm screws |