跳到步骤＃5
由 Brett Hartt — 编辑
编辑已通过 由 Brett Hartt
- 之前
- 之后
- 不变
步骤行
| + | [* icon_note] The display assembly is held in place by a large amount of adhesive on the underside of the large copper ESD shield. In the next few steps, you will be using a plastic spudger to release this adhesive. |
|---|---|
| + | [* icon_caution] Work carefully and slowly and make sure to not break the I/O data cable. |
图片1
没有之前的图片
已添加