跳到步骤＃1
由 Kristen Gismondi — 编辑
编辑已通过 由 Kristen Gismondi
- 之前
- 之后
- 不变
步骤行
| [* icon_caution] Make sure that the device is powered off and unplugged before removing components. | |
| - | [* red] Remove all ten (10) 5.5 mm Phillips #0 screws |
| + | [* red] Remove all ten (10) 5.5 mm Phillips #0 screws. |
| [* orange] Remove the two (2) plastic tabs located at the rear of the panel. Locate the two (2) 7.5mm Phillips #0 screws underneath the pads and remove. |