跳到步骤＃1
由 Ross B Jacques — 编辑
编辑已通过 由 Ross B Jacques
- 之前
- 之后
- 不变
步骤行
| + | [* icon_caution] Make sure that the device is powered off and unplugged before removing components. |
|---|---|
| + | [* red] Remove all ten 5.5 mm Phillips #0 screws |
| + | [* orange] Two 7.5 mm Phillips #0 screws will be located under the top rubber pads. These must be removed along with the plastic tabs. |
图片1
没有之前的图片
已添加
图片2
没有之前的图片
已添加
图片3
没有之前的图片
已添加