跳到步骤＃2
由 Cole Cummins — 编辑
编辑已通过 由 Cole Cummins
- 之前
- 之后
- 不变
步骤行
| [* black] Using a plastic opening tool, gently pry up a corner of the rear glass panel. | |
| [* black] Slowly slide the plastic opening tool around the outside of the glass panel to break through the adhesive. | |
| [* icon_note] Additional plastic opening tools can be used to help separate the back panel from the phone body. | |
| - | [* black] Gently lift the back panel off once all the adhesive has been removed. |
| + | [* icon_caution] Be careful not to tear the orange ribbon wire when removing the back panel. |
| + | [* black] Gently lift the back panel off once all the adhesive has been removed |