跳到步骤＃8
由 Walter Galan — 编辑
编辑已通过 由 Walter Galan
- 之前
- 之后
- 不变
步骤行
| + | [* icon_note] Open the device between 90 and 100 degrees, then rest it on its side. |
|---|---|
| + | [* red] While supporting both halves of the device with one hand, unscrew the upper 5.3 mm T8 Torx screw. |
| + | [* icon_note] Repeat the same process for the identical bottom screw. |
| + | [* icon_caution] Be sure to hold the display and upper case together with one hand. Failure to do so may cause the freed display/upper case to fall, potentially damaging each component. |
图片1
没有之前的图片
已添加
图片2
没有之前的图片
已添加